Msd 8650 Pontiac V8 Crank Trigger Kit Installation Bedienungsanleitung PDF herunterladen

Flying Magnet Crank Trigger Kit

Pontiac V8 Engines

PN 8650

Important: Read the instructions before attempting the installation.

Note: On some vehicles the MSD crank Trigger Kit may require slight modifications

to accomodate special engine plates, pulley systems, etc.

INSTALLING THE PICKUP AND BRACKET

1. Install the pickup holder

onto the bracket and snug

the bolts. Only two bolts will

correctly fit the threads of the

pickup base. Do not try to

force the bolts in.

2. Install the pickup bracket

onto the passenger side of

the balancer. Be sure to use

the correct length bolts and

shims in the proper positions.

3. Install the locknut onto the

pickup, then install the

pickup. Do not tighten the

locknut at this time.

AUTOTRONIC CONTROLS CORPORATION • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344

Parts Included

1 - Trigger Wheel 2 - Bolts, 5/16" - 24 x 1¼”

1 - Pickup Holder Assembly 4 - Bolts, 5/16"- 18 x 1¼”

1 - Trigger Wheel Spacer 4 - 5/16" Washers

1 - Non Magnetic Pickup Assembly 4 - Bolts, 3/8"- 16 x 1¼”

1 - Pickup Base 2 - Bolts, 3/8" - 16 x 3"

1-General Wiring Instructions 6 - 3/8" Washers

1-Tech Bulletin #104 2 - Thin Spacer Washers

Figure 1 Pickup Bracket Assembly.

1 2

Flying Magnet Crank Trigger KitPontiac V8 EnginesPN 8650Important: Read the instructions before attempting the installation.Note: On some vehicles t

FRM16022 Created 01/95 Printed In U.S.A.Figure 2 Pickup Centered on the Trigger Wheel.INSTALLING THETRIGGER WHEEL1. Position the No. 1 cylinderunder

Keine Kommentare

Msd 8650 Pontiac V8 Crank Trigger Kit Installation Bedienungsanleitung